S-Brick Mini

Small-format bricks with tumbled-round edges for curves, borders & inlays

S-Brick Mini Malaysia pairs a compact 100×50×60 mm module with a tumbled-round edge profile—no sharp corners. The fine-aggregate surface and softened arrises read contemporary (not rustic) while making tight curves, neat borders and inlays easier to lay and more forgiving in use.

Available Colors

LSM RED

LSM BEIGE

LSM BROWN

LSM SRED

LSM SBEIGE

LSM SBROWN

S-Brick Mini — Product Specification

Dimension (L × W × H)	100 × 50 × 60 mm
Weight / pc	± 0.6 kg
Packaging	8 pcs/bundle · 2,160 pcs/pallet
Colours	Red, Beige, Brown (speckled options available)
Edge profile	Tumbled / rounded (no sharp corners)
Notes	Dimensional tolerance ±3 mm; colour variation ±5%.

S-Brick Mini (LSM) – Coverage Calculator

Calculation type

Orientation (linear) Stretcher uses 100 mm; Header uses 50 mm + joint.

Joint width (mm) Typical 6–10 mm. Face fixed at 100 × 50 mm.

Area

Enter area. Switch units if your plan is in ft².

Wastage allowance (%) Common practice: 5–10% for cuts & offcuts.

Module (incl. joint):–

Coverage:–

Adjusted area/run (incl. wastage):–

Pieces required (rounded up):–

Bundles required (8 pcs/bundle):–

Pallets required (2,160 pcs/plt):–

Estimated total weight (±0.6 kg/pc):–

How this is calculated

Fixed face 100 × 50 mm. Module with joint: (100+J) × (50+J) mm.
Surface: pcs/m² = 1 ÷ [((100+J)/1000) × ((50+J)/1000)].
Linear: pcs/m = 1000 ÷ (edge along run + J), edge = 100 mm (stretcher) or 50 mm (header).
Adjusted value = input × (1 + wastage%). Bundles = ceil(pcs ÷ 8). Pallets = ceil(pcs ÷ 2,160). Weight ≈ pcs × 0.6 kg.

Key Feature

Tumbled-round edges for a softer contemporary line and safer touch
Fine-aggregate, non-rustic surface; colour-stable in Red, Beige, Brown
Compact module enables tight curves and precise inlays
Durable concrete for tropical climates; low maintenance