S-Brick Veneer

Clean, modern thin-brick veneer for façades & feature bands

S-Brick Veneer Malaysia delivers a contemporary thin-brick finish with crisp edges, stable colour and a fine, non-rustic texture. Engineered for lightweight wall applications—feature walls, plinths, columns and facade banding—the veneer keeps the refined S-Brick look while minimising depth and installation time.

Available Colors

LSV RED

LSV BEIGE

LSV BROWN

LSV WHITE

LSV SRED

LSV SBEIGE

LSV SBROWN

LSV SWHITE

S-Brick Veneer — Product Specification

Face size (L × H)	215 × 65 mm
Thickness	15 mm
Weight / pc	± 0.5 kg
Packaging	63 pcs/box
Recommended joint	6–10 mm (typical)
Reference coverage	≈ 61.4 pcs/m² (J = 8 mm)
Notes	Coverage is based on visible face (L × H). Thickness does not affect m² coverage.

S-Brick Veneer (LSV) – Flat Coverage Calculator

Joint width (mm) Typical 6–10 mm. Face fixed at 215 × 65 mm.

Wall area

Tip: switch units if your plan is in ft².

Wastage allowance (%) Common practice: 5–10% for cuts & offcuts.

Module (incl. joint):–

Coverage (pcs/m²):–

Adjusted area (incl. wastage):–

Pieces required (rounded up):–

Boxes required (63 pcs/box):–

Estimated total weight (±0.5 kg/pc):–

How this is calculated

Module L = (215+J)/1000 m; Module H = (65+J)/1000 m; Module area = L×H (m²/pc).
Coverage (pcs/m²) = 1 ÷ Module area.
Adjusted area = input × (1 + wastage%). Pieces = ceil( coverage × adjusted area ).
Boxes = ceil( Pieces ÷ 63 ). Estimated weight = Pieces × 0.5 kg.

Key Feature

Clean, contemporary veneer - crisp arrises, fine-aggregate texture.
Lightweight installation- thin profile reduces load and cuts install time.
Colour-consistent -controlled pigments and batching for uniform tone.
Modular flexibility -bands, panels, columns, plinths, and feature walls.